Disposable Gas Bottle Regulator to suit Argon and Argon / CO2 – Bossweld – 600044

Hampdon Industrial is pleased to stock quality Bossweld Gas Bottle Equipment.

Only $1 for Express Post. 

This is a reusable gas bottle regulator to suit disposable gas bottles.

5mm Push-On outlet with standard 5/8 UNF thread
Has Australian Standard 5/8 UNF Outlet Thread
Suits barb 5mm fitting (959-AO)
Use with hose (WH10005-AR) and hose clamp (NCVA.FS.9.11)
Spare O rings (600044-ORING-5PK) 
Can be used with any 10mm Disposable cylinder.  Nitrogen, Oxygen, Argon, and Argon / Co2. 
Cast brass construction
Easy to read gauge
Gauge is 50mm in Diameter
Suits 1L and 2.2L disposable gas bottles – 10mm Metric Thread for bottle connection
10mm metric right hand thread
Will fit Tradeflame oxygen cylinders
Tesuco equivalent part number OTMRIGP5
Flows up to 12 Litres per minute (LPM)
Please note:
Warranty will not be given if the washer on the base of the regulator is damaged due to over tightening
When screwing down the regulator please only do it hand tight.
Remove regulator from gas bottle after each use to eliminate gas loss