Electrode for UNIMG CBR50 Bossweld LT50 Trafimet CB50 5 Pack
$29.99
Product Introduction
Compatible with UNIMG CBR50, Bossweld LT50, and Trafimet CB50 torches, this 5-pack of hafnium electrodes (1521-HF) is ideal for Unimig Viper Cut 40 plasma cutting systems, ensuring reliable performance and durability.
Product Parameters
| Compatibility | UNIMG CBR50, Bossweld LT50, Trafimet CB50 Torch |
| Pack Size | 5 Pack |
| Electrode Material | Hafnium (1521-HF) |
| Part Numbers | 94.PR0016, 94.PR0017 |
| Suitable For | Unimig Viper Cut 40 |
UNIMIG CBR50 Plasma Torch Consumables – 5 Pack Electrode Hafnium (1521-HF) for Viper Cut 40
| Description | Premium 5-pack of hafnium electrodes (1521-HF) compatible with UNIMIG Viper Cut 40 plasma cutters, part numbers 94.PR0016 and 94.PR0017. |
|---|---|
| Core Selling Points | High-purity hafnium, 5-piece value pack, OEM compatibility, extended service life, precise arc performance |
| Product Parameters | Material: Hafnium Quantity: 5 pack Model: 1521-HF Compatible Machines: UNIMIG Viper Cut 40 Part Numbers: 94.PR0016, 94.PR0017 |
| Application Scenarios | Ideal for metal fabrication, automotive repair, industrial maintenance, and DIY metal cutting projects using Viper Cut 40 systems. |
| Core Performance | Stable arc initiation, consistent cutting precision, high heat resistance, reduced spatter, optimized current conductivity |
| Accessory Evaluation | Engineered for minimal wear during continuous operation, ensuring fewer replacements and lower downtime compared to generic alternatives. |
| Quality Assurance | Manufactured to strict OEM specifications with rigorous quality control, ensuring reliable performance and safety compliance. |
| Differentiation | Genuine UNIMIG compatibility guarantees perfect fit and performance, unlike universal electrodes that may cause suboptimal results or equipment damage. |
FAQ
Q: Will these electrodes work with other plasma cutters?
A: Designed specifically for UNIMIG Viper Cut 40 models. Compatibility with other machines is not guaranteed.
Q: How often should I replace the electrode?
A: Replacement frequency depends on usage intensity; typically after 5-8 hours of continuous cutting for optimal results.
Q: Are these genuine UNIMIG parts?
A: Yes, these are authentic consumables meeting UNIMIG’s original equipment standards.
Contact Us for Wholesale Inquiries
As a leading Chinese manufacturer of welding and cutting accessories, we offer competitive pricing for bulk orders. Contact our sales team today to discuss your requirements and receive a personalized quote.
Packaging & Transportation
weldercutting Nozzles
Related products
1.0mm Contact Cutting Kit for 45A PT80 Plasma Cutter Drag Tip
Product Description
Complete plasma torch consumables kit made in Italy, designed to replace front-end parts for compatible plasma cutters. Ensure safety with appropriate protective gear during use.
Specifications
| Compatibility | Cut 45, Cut 80, Cut 40, PT 80 Plasma Cutters, Tecmo 80 |
| Origin | Italy |
| Kit Includes | 1.0mm Cutting Tip (5 Pack), Shield Cap for Cutting (1), Shield Cap Body (1) |
| Standard | OEM standard for Hampdon Industrial |
1.2mm Contact Cutting Tips for SC80 Plasma Torch 5pcs Italy
Product Introduction
High-quality 1.2mm contact cutting tips for SC80 plasma torch, made in Italy. Ensures clean, precise cuts with optimal gas focusing. Suitable for fine, detailed work. Value pack of 5, not inferior copies.Product Parameters
| Quantity | 5 Each |
| Material Origin | Made in Italy |
| Compatibility | UNIMIG RAZOR Cut 40/45/80 Plasma Cutters |
| Rated Current | 70-80A |
| Dimensions | 21mm length, 8mm inner diameter, 11mm width |
2 x O Ring for AT1000 Air Filter Cartridge Plasma Cutter Sand Blaster
Product Introduction
2 Pack of high-quality hard rubber 'O' Rings designed for AT1000 compressed air filter cartridges, suitable for plasma cutters and sand blasters. Ensures perfect seal with torque housing 15-18 nm, exceeding OEM standards.
Product Parameters
| Quantity | 2 Pack |
| Material | High-Quality Hard Rubber |
| Inside Diameter | 118.34 |
| Outside Diameter | 125.24 |
| Torque Requirement | 15 to 18 nm |
50 Pack Shield Cap for HF Pilot Arc Plasma Torch 60 Series AG60
Product Introduction
50 Pack Shield Caps designed for HF Pilot Arc Plasma Torches, compatible with 60 Series AG60 and models like WSD-60P, P60, AG-60, SG-55. High-quality ceramic construction ensures durability for plasma cutting applications.
Product Parameters
| Quantity | 50 Pack |
| Material | Highest Quality Ceramic |
| Current Rating | Up to 60 Amps |
| Type | Screw On |
| Compatibility | WSD-60P, P60, AG-60, AG60, SG-55, SG55 |
8 x AT1000 Compressed Air Line Filter Replacement
Product Introduction
A sub-microbic compressed air filter for plasma cutters, removing small contaminants, condensed moisture and oil aerosol to ensure clean, dry and oil-free air, protecting machine performance. Made in Italy with exceptional quality.
Product Parameters
| Suits | All Plasma Cutters |
| Pack | 8 x Filters value pack |
| Length | 177mm |
| Width | 107mm |
| Inner Diameter | 37mm |
AT1000 Compressed Air Filter for Plasma Cutter Sand Blaster Spray Paint
Product Introduction
The AT1000 is a sub-microbic compressed air filter designed for plasma cutters, sand blasters, and spray paint. It removes moisture, oil aerosols, and small contaminants, ensuring clean, dry air to protect equipment performance and prevent torch damage. Made in Italy with exceptional quality, it suits all plasma cutters, pneumatic tools, and spray painting applications.
Product Parameters
| Filtration | 0.01 micron |
| Max Flow | 1250 l/min |
| Max Pressure | 125psi (8.5 bar) |
| Thread | 1/4" NPT |
| Dimensions | 132mm diameter x 200mm high |
Binzel PSB121 Plasma Torch 1.5mm Cutting Tips 5 Pack SB801 743.0142
Product Introduction
Premium Binzel Style plasma cutting tips for PSB121 Air Cooled Torches. Made in Italy, these 1.5mm consumables offer longer service life than standard spares, ideal for precision cutting applications.
Product Parameters
| Model | Binzel Style PSB121 |
| Cutting Tip Size | 1.5mm |
| Part Number | SB802-15 (743.0132) |
| Quantity | 5 Pack |
| Origin | Italy |
Viper Cut30 PT30 PT40 PT60 0.9mm Plasma Cutting Tip 5pk
Product Introduction
High-quality 0.9mm plasma cutting tip, made in Italy to OEM specifications. Compatible with various torches including UNIMIG SC30, Viper CUT30, and WIA SCP45. Long-lasting replacement for reliable cutting performance.
Product Parameters
| Quantity | 5 Each |
| Material | High Quality |
| Dimensions | 9mm width, 7mm ID, 18.5mm length |
| Compatibility | UNIMIG CUT45, Viper CUT30 Mk1/Mk2, WIA Cutmatic 45 |